Adam Sharp

• Company Overview: Gode Wind 3 / Borkum Riffgrund 3 (GPW Project), Germany
• Monitor the quality and commissioning activities of WTG components offshore in the German North Sea.
• Ensure outstanding works and quality issues are identified and reported.
• Oversee mechanical and electrical completion to ensure compliance with HSE rules and legislation.
• Review work reports and confirm alignment with the commissioning manual.
• Ensure tests are carried out and documented per project rules, procedures, and templates.
• Record progress in daily progress reports and support proactive project management.
• Assist the WTG Commissioning Supervisor with reporting and coordination tasks.
• Perform offshore commissioning walk-downs with the supplier and report quality issues via NCR system.
• Validate DPRs, review and accept supplier snag/NCR lists; log data in internal systems.
• Participate in site meetings, ensure proper safety signage and compliance, and support HSE implementation.
• Review as-built documentation and contribute to data collection for quality performance analysis.
• Deliver detailed inspection and commissioning reports as required by the WTG Commissioning Manager.
• Gode Wind 3 / Borkum Riffgrund 3 (GPW Project), Germany

• Company Overview: Fécamp Offshore Wind Farm, France
• Worked externally for EDF Renewables supervising offshore commissioning on the SGRE 7.0MW WTG.
• Conducted site walk-downs and checks of WTG equipment to ensure readiness and compliance.
• Reviewed and issued inspection, walk-down, and daily progress reports.
• Provided comments and reviews on relevant HSE and commissioning documentation (including PTW and RAMS).
• Reviewed and validated test reports, checklists, and commissioning records.
• Ensured all outstanding work and quality issues were documented and addressed.
• Reported HSE issues using Sphera and coordinated with the quality department for efficient monitoring.
• Supervised daily contractor commissioning activities, ensuring test procedures were completed correctly.
• Participated in commissioning and performance tests to verify compliance with project requirements.
• Prepared and monitored snagging lists logged via Aconex Field.
• Ensured compliance with electrical safety and permit-to-work systems.
• Attended daily site meetings and supported the transfer of assets to O&M.
• Contributed to data collection and quality performance analysis.
• Delivered detailed end-of-shift handover reports.
• Fécamp Offshore Wind Farm, France

• Company Overview: Racebank and Westermost Wind Farms, UK
• Assisted the Troubleshooting & Service Team across Ørsted's Westermost Rough and Racebank Wind Farms.
• Performed service campaign works including high-voltage duties and troubleshooting on SGRE 6MW Direct Drive WTGs.
• Conducted fault diagnosis and system recovery, contributing to turbine uptime and performance.
• Implemented Lock Out Tag Out (LOTO) and Energy Isolation Procedures in accordance with AT Offshore Supervisor standards.
• Executed HV tasks in compliance with safety rules and project-specific switching procedures.
• Supported technical documentation and coordinated with Ørsted site management and back office.
• Ensured completion of daily production reports (DPRs) and other client-required records.
• Maintained high standards in health and safety during all offshore activities.
• Racebank and Westermost Wind Farms, UK

• Company Overview: Various Ørsted Wind Farms, UK & Germany
• Led a team of technicians on SGRE 6MW and 7MW Direct Drive WTGs across Ørsted wind farms in the UK and Germany.
• Conducted inspections including end-of-warranty walk-downs, blade inspections, and generator checks.
• Participated in heavy lift activities such as gearbox, generator, blade, and HSS bearing exchanges on 3.6MW and 4.0MW WTGs.
• As Team Lead, responsible for turbine start/stop and executing LOTO procedures per EIP/AWP protocols.
• Carried out service tasks, fault finding, troubleshooting, and maintenance on turbine systems.
• Applied advanced fault-finding techniques with strong understanding of electrical/mechanical schematics and Caddy++.
• Coordinated with technical support and site management to ensure safe and efficient task execution.
• Maintained high safety standards while managing daily workflows, task distribution, and DPR completion.
• Various Ørsted Wind Farms, UK & Germany

• Company Overview: Gode Wind 1 & 2, Borkum Riffgrund 1 Wind Farms, Germany
• Acted as SGRE Level 7 Offshore EFK (Elektrofachkraft) Team Lead on German offshore wind farms.
• Led service and troubleshooting teams on SGRE 6.0MW Direct Drive WTGs at Gode Wind 1 & 2.
• Oversaw support and repairs for SWT-4.0MW-120 WTGs at Borkum Riffgrund 1.
• Performed advanced troubleshooting and technical diagnostics across electrical and control systems.
• Ensured safe implementation of HV and LOTO procedures in line with German offshore electrical standards.
• Coordinated with client representatives and back-office teams to streamline service activities.
• Delivered technical guidance and daily coordination to field technicians in challenging offshore conditions.
• Gode Wind 1 & 2, Borkum Riffgrund 1 Wind Farms, Germany

• Company Overview: Merkur Offshore Wind Farm, Germany, North Sea
• Employed full-time by Delpro A/S (Denmark) providing HV electrical support on the Merkur Offshore Wind Farm.
• Installed, tested, and maintained high voltage systems (33kV/155kV) across WTGs, OSS, and inter-array cables.
• Supported HV switching operations in accordance with WTSR, EWR, and project-specific procedures.
• Performed insulation resistance testing, pressure testing, and partial discharge analysis on HV assets.
• Assisted with commissioning and energisation of HV equipment to meet grid compliance standards.
• Interpreted SLDs, protection schematics, and control diagrams to support fault finding and diagnostics.
• Collaborated with HV Safety Coordinators, SCADA engineers, and commissioning teams for system readiness.
• Assisted the Senior Authorised Person (SAP) in preparing PTW, SFT, and LOTO documentation.
• Actively contributed to HSE culture through toolbox talks, risk assessments, and safe work practices.
• Merkur Offshore Wind Farm, Germany, North Sea
• Supported the successful energisation of the Merkur Offshore Wind Farm ahead of schedule with zero LTIs.
• Resolved critical HV testing anomalies, reducing project delays and ensuring system integrity.
• Helped streamline HV commissioning procedures, improving efficiency and reducing test times.

• Fully authorised SGRE Offshore WTG Technician working directly for Siemens Gamesa.
• Served as Level 7 Commissioning Team Lead on SGRE 6/7MW Direct Drive platforms.
• Led commissioning/completion teams and provided supervision, leadership, and motivation to technicians.
• Performed troubleshooting and fault finding on SGRE 6.0/7.0MW DD WTGs.
• Implemented LOTO and Energy Isolation Procedures (EIP) to ensure safe electrical work.
• Directed personnel to meet safety and task objectives, managing workloads and priorities based on team expertise.
• Liaised with client management to update on project progress and coordinate handovers.
• Maintained site documentation including risk assessments, method statements, and toolbox talks.
• Conducted third-party QA walkdowns and supported client handovers.
• Supervised 500-hour service tasks and provided technical support across commissioning teams.
• Used SCADA for park monitoring, remote fault diagnostics, and turbine stop/restarts.
• Consistently upheld high safety standards in line with site-specific HSE requirements.

• Company Overview: Hatfield Deep Coal Mine, Doncaster, UK
• Apprentice-trained, qualified electrical technician responsible for installation and maintenance of heavy mining equipment.
• Authorised to isolate, work on, and test electrical systems ranging from 0.4VDC to 11kV.
• Maintained and fault-tested production equipment on the coal face and in development areas.
• Hands-on experience with Joy 7LS shearer machines, RS20S Faceboss chock systems, and Joy JCM mining machinery.
• Serviced and repaired transformers, switchgear, VSDs, motors (110V to 11kV), PLC systems, AC/DC motors, and telemetry systems.
• Proficient in electrical schematics, distribution diagrams, and troubleshooting control circuitry.
• Quickly responded to breakdowns to minimise equipment downtime.
• Raised and resolved defects through internal reporting systems; managed and issued relevant compliance paperwork.
• Followed strict daily permit-to-work protocols and completed risk assessments.
• Hatfield Deep Coal Mine, Doncaster, UK