Annalena Breitenstein
Landsberg am Lech
Übersicht
13
13
years of professional experience
Berufserfahrung
Test Engineer on Aircraft
Airbus Helicopters Deutschland GmbH
Donauwörth
2025.01 - Current
- Development of Flight and Ground Tests on prototypes (H140 and H145M), successful ground test for avionic systems for the first H140 prototype
- Responsibility for Ground Test avtivities on helicopter prototypes (development and certification systems) with related interfaces (Chief Engineering/ Project, Proto Shop, Design Office, H/C test coordinator/ Test squad leader) incl. H/C Configuration Check
- Definition and performing new test procedures for avionic systems on H/C, analyzing and validating test data with immediate debriefing before flight tests, define systems enhancements in cooperation with the manufacturer on aircraft
- Management of a new development project and leading working groups regarding flight test process optimization through innovative testing methods, budget responsibility (100k€), incl. new patent application
- Contribution to test strategies regarding Ground Test score making the bridge between upstream means (H/C 0, System integration rig and VIP) and Flight Testing activities
- Troubleshooting on aircraft
Configuration Mgt Operations Responsible
Airbus Operations GmbH
Hamburg
2022.05 - 2024.12
- Configuration Management on complex Cargo Systems Composite of new Development of mechanical Systems with multi ATA interfaces, Cross Programm (Single Aisle (SA), A330, A350 and A350 Freighter (A350F))
- Leading stakeholders international regarding Full Feasibility Studies (FFS)
- Version-Definition according to the Full Change Process (FCO)
- Responsibility as Focal Point for new Development Modifikations for new aircraft A350F on time, on cost, on quality
- Successful patent application R&T
- Responsibility for complex minor and Major Modifikations (Baseline and Custo) on Kick-off- und Maturity, und Decision-Boards
- Support MAP Engineering (Mies au Point, Final Assembly Line) Airbus Operations GmbH in Toulouse for mechanical and electrical Systems for A350 and A330
- Development of new modification for a new test rig for A350F (Cargo 0), Airbus Operations GmbH Bremen
Master Thesis
Airbus Operations GmbH und Deutsches Zentrum für Luft- und Raumfahrt (DLR), TU Braunschweig
Bremen
2021.10 - 2022.04
- Support Project Zero Emission Equipped Tank
- Development of a Test Strategie for permeation tests of a liquid hydrogen CFRP- tank
- Define test methods
- Acquire new suppliers for testing
- Successful patent application
Working Student
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
Stade
2021.05 - 2022.03
- Development and evaluation of test methods of test specimens at cryogenic temperatures
Working Student/ Thesis
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
Braunschweig
2020.08 - 2020.11
- Thesis Evaluation of thermo-mechanical structural experiments for validation of FE analysis
- Structure analysis methods development for primary structure of composite materials
- Structure test campaign support for repräsentative space structures (Test Support and Virtual Testing)
Working Student
Technische Universität Braunschweig
Braunschweig
2019.11 - 2020.04
- Design of brush trailing edles for flat Plate and the linerfoils
- Performing measurement campaign in the wind tunnel
- Evaluation of measurement results and documentation
Working Student
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
Braunschweig
2019.06 - 2021.04
- Static Testing Laboratory
- Coordination und performing of mechanical tests of composites according to DIN ISO EN/IEC 17025 DAkkS, Nadcap akkreditiert and Attestation of Airbus Testing Authorisation to Proceed
Bachelor Thesis
Airbus Operations GmbH
Hamburg
2017.12 - 2018.06
- Development of Design Rules for Rear Pressure Bulkhead with respect to stability under imperfections
- New European patent application
- Engineering FAF (Forward and AFT Fuselage), Primary structure
- Development of new Detailed FEM (DFEM) stress avtivities
- Perfoming linear and non-linear FE analysis
Internship
Airbus Operations GmbH
Hamburg
2017.10 - 2017.11
- Primary Structure A380
- FAF Enginnering
- Development of a new structure concept of a rear pressure bulkhead accOrding to manufacturing proccesses
- Linear and non-linear FE analysis with MSC Nastran/Patran
Working Student
Leibniz Universität Hannover
Hannover
2015.12 - 2017.10
- R&T project for Airbus regarding contact mechanics and friction of Aircraft tires for A380 and A350
- Development of simulation methods for temperature profiles of aircraft tires during takeoff and landing (Matlab)
Working Student
Leibniz Universität Hannover
Hannover
2014.06 - 2014.08
- Computational Fluid Dynamics (CFD)-Software ANSYS Training
- Validation of steady/unsteady CFD strategies in the Design of axial/ radial compressor for gas turbine engines
Internship
MTU Maintenance Hannover GmbH
Hannover
2013.06 - 2013.08
- Technical pre- internship
- Quality assurance and findings
- Engine assembly
Internship
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
Braunschweig
2013.04 - 2013.05
- Test automation and Flight tests for Autonomous Rotorcraft Testbed for Intelligent Systems (ARTIS)
- Simulation with Matlab/ Simulink-Models, C++.Codes (preprocessor, compiler und linker functional object-oriented programming), Software tests and Software quality for ARTIS Software-Frameworks
- Performing Flight Tests for Unmanned Aerial Vehicle (UAV)
- Data analyses UAV navigation for image processing
Ausbildung
Master of Science - Aerospace Engineering/Luft- und Raumfahrttechnik
Technische Universität Braunschweig
Braunschweig 2020 - 2022
Bachelor of Science - Mechanical Engineering/ Maschinenbau
Gottfried Wilhelm Leibniz Universität Hannover
Hannover 2013 - 2020
Abitur -
Integrierte Gesamtschule IGS Mühlenberg
HannoverKompetenzen
- Configuration Management Cargo and mecanical Systems
- Engineering
- Design
- Project Management
- Aircraft systems
- Equipment Design
- Development
- Integration
- Testing
- CATIA
- DOORS
- DMU
- CFD Simulation
Languages
German
First language
English
Advanced
C1
French
Beginner
A1
Zeitleiste
Test Engineer on Aircraft
Airbus Helicopters Deutschland GmbH
2025.01 - Current
Configuration Mgt Operations Responsible
Airbus Operations GmbH
2022.05 - 2024.12
Master Thesis
Airbus Operations GmbH und Deutsches Zentrum für Luft- und Raumfahrt (DLR), TU Braunschweig
2021.10 - 2022.04
Working Student
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
2021.05 - 2022.03
Working Student/ Thesis
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
2020.08 - 2020.11
Working Student
Technische Universität Braunschweig
2019.11 - 2020.04
Working Student
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
2019.06 - 2021.04
Bachelor Thesis
Airbus Operations GmbH
2017.12 - 2018.06
Internship
Airbus Operations GmbH
2017.10 - 2017.11
Working Student
Leibniz Universität Hannover
2015.12 - 2017.10
Working Student
Leibniz Universität Hannover
2014.06 - 2014.08
Internship
MTU Maintenance Hannover GmbH
2013.06 - 2013.08
Internship
Deutsches Zentrum für Luft- und Raumfahrt (DLR)
2013.04 - 2013.05
Master of Science - Aerospace Engineering/Luft- und Raumfahrttechnik
Technische Universität Braunschweig
2020 - 2022
Bachelor of Science - Mechanical Engineering/ Maschinenbau
Gottfried Wilhelm Leibniz Universität Hannover
2013 - 2020
Abitur -
Integrierte Gesamtschule IGS Mühlenberg